智能变电站设备管控大数据分析系统研究

结合数据挖掘、大数据技术在电力系统中的应用现状，分析和设计了一种智能变电站设备管控大数据分析系统。对变电站设备运行状态的大数据特征及基本框架进行了分析，并重点阐述了变电站设备运行状态大数据分析系统的数据集成与预处理、数据存储与处理、设备状态评估模型以及数据可视化展示。实验结果表明，所设计的大数据分析系统能够大幅度提升变电站设备数据分析智能化水平，为变电站管控稳定运行提供更加有效和实用性的技术支撑。     

锂化合物对硫铝酸盐水泥性能的影响分析

硫铝酸盐水泥是近年来广受关注的重要低碳水泥品种,在快速修补和防渗堵漏应用中,需要掺入适宜的促凝剂来满足施工要求.研究了两种锂化合物对硫铝酸盐水泥凝结时间、强度的影响规律,并采用XRD和SEM手段分析水泥水化产物.结果表明,当掺入两种锂化合物之后,硫铝酸盐水泥的凝结时间有明显的降低,并且Li2 CO3对硫铝酸盐水泥的促凝作用比LiOH·H2 O更为显著;硫铝酸盐水泥的小时强度随着Li2 CO3掺量的增加而明显提高,LiOH·H2 O对水泥小时强度的影响并不明显,两种锂化合物均会降低水泥的后期强度;从水化产物的微观分析来看,硫铝酸盐水泥的水化产物种类并不会因掺加锂化合物而有所改变,Li2 CO3对硫铝酸盐水泥的1 d水化有所促进,而LiOH·H2 O不会对水化产物产生明显影响.     

基于振动实测的非均质地层钻头失效分析与对策

四川盆地作为国内页岩气开发的重点区域,通过近几年的不断攻关和实践,机械钻速得到了提高,但由于受地层复杂、可钻性差、非均质性强等地质因素的影响,导致井下钻柱系统不良振动剧烈,容易出现钻头损坏严重、钻速较低等问题,严重影响了钻井时效。为了解决上述难题,以该盆地涪陵工区上二叠统龙潭组—中二叠统茅口组为例,采用井下振动高频测量工具的实测手段,测量了钻头—钻柱系统的动态振动加速度参数,结合地层的岩性和矿物组分分析,研究钻头失效原因与对策,并开展了现场试验。研究结果表明:①在非均质地层中钻进的钻头—钻柱系统产生了大于40 m/s~2的高幅值瞬时冲击振动,高幅值的瞬时冲击是导致钻头先期失效的主要原因;②提出了抑制高幅值的瞬时冲击振动采用"减振+增压"工具组合和避免井下工具共振的钻井参数;③采用钻井新参数的试验井比邻井的高幅值瞬时振动降低了17%,单只钻头进尺增加24%,钻头工作环境得到了较大的改善,钻头使用数量减少。结论认为,该研究成果能够有效地改善钻头—钻柱系统的振动状态,有利于达成延长钻头使用寿命的目标。     

Structural,magnetic and magnetostrictive properties of Co1-xLixFe2O4 synthesized by cathode materials of spent Li-ion batteries

In this study, we investigated the effects of substituting Li⁺ for Co²⁺ at the B sites of the spinel lattice on the structural, magnetic and magnetostrictive properties of cobalt ferrites. The Li⁺ substituted cobalt ferrites, Co_1-xLi_xFe₂O₄, with x varying from 0 to 0.7 in 0.1 increments, were synthesized with a sol-gel auto-combustion method using the cathode materials of spent Li-ion batteries. X-ray diffraction analysis revealed that all the Co_1-xLi_xFe₂O₄ nanopowders had a single-phase spinel structure and the lattice parameters decreased with increasing Li⁺ content, which can be proved by slight shifts towards higher diffraction angle values of the (311) peak. Field emission scanning electron microscopy was used to observe the fractured inner surface of the sintered cylindrical rods and the increased porosity resulted in a decreased magnetostriction. The oxidation states of Co and Fe in the cobalt ferrite samples were examined by X-ray photoelectron spectroscopy. High resolution transmission electron microscopy micrographs showed that most particles were roughly spherical and with sizes of 25–35?nm. Li⁺ substitution had a strong effect on the saturation magnetization and coercivity, which were characterized with a vibrating sample magnetometer. The Curie temperature was reduced due to the decrease in magnetic cations and the weakening of the exchange interactions. The magnetostrictive properties were influenced by the incorporation of Li⁺ at the B sites of the spinel structure and correlated with the changes in porosity, magnetocrystalline anisotropy and the cation distribution.     

Comparative studies on thermal and toughness properties of polybenzoxazine composites with two functionalized graphene oxides

Abstract

Graphene oxide (GO) was functionalized by polyether amine (PEA) via two methods which were one-pot modification in acetone (GON) and two steps with the intermediate product of GOCO-Cl generated (GONS). There were more PEA successfully grafted onto GO for GONS than GON. The onset polymerization temperatures of the benzoxazine (Bz) composites decreased by the inclusion of 1?wt% of GO, GON or GONS. Thermal stability of the polybenzoxazine (PBz) composites was significantly improved indicated from the increase of weight loss temperature. T₁₀, T₂₀ and T₅₀ values of the composites with GONS were higher than that of the others. Toughness of PBzs may be enhanced by the incorporation of nanofillers, and GONS had stronger interfacial interaction with PBz matrix than GON.     

The origin of the modulated structure in Sr2CuO3+δ (δ = 0.4): [CuO2] in-plane oxygen vacancy or apical oxygen vacancy?

We propose the question of the modulated structures of copper oxide is caused by the [CuO₂] in-plane oxygen vacancy or apical oxygen vacancy. Sr₂CuO_3+δ single-crystal samples were prepared using high-temperature and high-pressure methods. The major phase of Sr₂CuO_3+δ (δ = 0.4) single-crystal system is found to be constituted by the 5 a modulated structure with the Fmmm space group, which originates from the [CuO₂] in-plane oxygen vacancy appearing in octahedral Cu-O. Besides, the presence of the [CuO₂] in-plane oxygen vacancy may obliterate the superconductivity of the system. Experimental results deduce that the oxygen vacancy may appear in the apical oxygen sites in high-temperature copper oxide superconductors.     

卡尔费休法测定液态氯乙烯中水含量的研究

采用卡尔费休法测定了液态氯乙烯单体中的水含量。试验确定了采样工具、样品的预处理方式及选用溶剂的最优方案,并进行了精密度与准确度的验证。结果表明卡尔费休法测定液态氯乙烯单体中的水含量准确、快速,可以用来准确、及时地指导生产。     

脱硫活性焦水洗再生过程实验研究

对5种活性焦水洗再生前后的脱硫性能进行实验研究，通过比表面积（BET）、X射线光电子能谱（XPS）方法表征水洗再生工艺对活性焦孔隙结构和表面化学性质的影响，揭示影响活性焦水洗再生性能的关键因素。结果表明:活性焦脱硫硫容的大小和水洗再生率的高低没有直接关系；微孔比表面积较大的活性焦脱硫性能较好，中大孔孔容较大的活性焦水洗再生率较高，同时具备较大的微孔比表面积和中大孔孔容结构的活性焦适宜水洗再生工艺；活性焦表面极性含氧官能团含量越高水洗再生效果越好；活性焦AC5经过6次水洗再生循环，微孔中的硫酸经过多次累积后可以被水洗出，稳定再生率保持在45%~50%，最适用于活性焦水洗再生工艺。     

关于当前钢材市场形势的看法

从今年3月初以来,钢材市场行情呈现明显恢复性上扬态势。据中国钢铁工业协会财务资产部和冶金价格信息中心发布的钢材价格指数,5月15日-5月19日板材平均已恢复到110.34点,比去年末上升17.92点,价格恢复性上涨19.38%,但比去年5月份的146.1点仍低24.5%;长材价格指数略有同升,在94.37点,比去年末只回升3.56点,价格只恢复性上涨3.92%,比去年5月份的102.19点仍低7.65。掘国家统计局数据,一季度全国规模以上工业企业销售收入同比增长25.3%,实现利润同比增长21.3%,但钢铁企业由于去年下半年价格大幅度下降,今年一季度钢协会员企业(钢产量占全国81.8%)销售收入同比下降5.18%,实现利润同比下降     

基于量子效应的微型推进器设计

微/纳机电系统(MEMS/NEMS)技术的发展,大大促进了航空航天领域飞行器的微型化。依据量子理论,有效提取真空中的零点能,并以此作为驱动能源,可以解决微型飞行器由于必须携带燃料而增加重量等问题。从理论上阐述了真空零点能及Casimir力的产生机理,研究了真空中两平行平板和矩形腔等结构设计依据,提出并建立了以Casimir力作为驱动力的微型推进器设计模型。